Our Team has been Empaneled by J&K Energy Development Agency , Government of J&K (JAKEDA) and we've partnered with Industry leaders in Renewable Energy and Automation to provide you state of art solutions, for power that's always ON for your facility. We're also a member of Indian Green Building Council (IGBC).
Our dedicated group of Professional Engineers (with Global Experience of working in Europe and Middle East) will provide technical design and consultancy to ensure you get a reliable system for years to come. We've Solutions for both Domestic and Commercial Sector.
Solar rooftop system is a reliable, easy-to-install system with a lifespan of 15 years using existing roof space to generate clean energy helping you save on electricity charges. A typical solar system consists of solar panels (which absorb sunlight), inverter (which converts DC into AC), mounting structure (that hold the panels in place), batteries (to store the extra power generated), grid box and balance of systems (wires, nuts etc.).
An on-grid system is also known as a grid-tied system. It is one that works with your local utility’s company e.g Distribution companies as PDD in J&K..
How? The system generates electricity for your home and sends the excess power generated into the national electric grid for compensation (made possible through feed-in tariffs or net metering) from the distribution company.
On the other hand, an off-grid system is a system that is totally independent of the national electric grid. Or it can be installed as a parallel source of electricity. Individuals in cities who were formerly connected to the grid can also decide to go off-grid.
Needs a full fledged back up system (Batteries)
Hybrid systems are systems that have two generation sources e.g a solar powered system with storage and a grid tied system. It combines the best approaches of both on-grid and off-grid systems. It could be connected to the national electric grid too.
Lithium is the lightest of all metals, it has the greatest electrochemical potential and provides the largest specific energy density. Due to its high energy density, long cycle life, better performance and high thermal safety Li-ion batteries have become the most promising and fastest growing battery technology in market.
The smart electrical panel designed as per IEC 61439 Standards provides unmatched safety for electric power distribution. It connects various power sources to a single point, with PLC controls for switching the source.
Safe and easy termination of various power sources. The Keys features of Smart Electrical Panel:
• Automation & control for intelligent Power Distribution and Control to suit the villa’s specific needs
• Intelligent supervision and alarm systems for the entire electrical system of the villa
• Intelligent solar energy management with battery management
• IoT Interface possible (alarm & notification through sms) and Cloud connectivity
• Easy integration with existing home automation systems like KNX, Crestron, etc.
Smartly Distributes the total demanded load between Solar and DG in such way that the DG runs at the minimum possible load, securing against reverse feeding and protecting the inverters from over-frequency damage, while also increasing fuel efficiency.
Heat pumps are generally more energy efficient than traditional heating and cooling systems because they use electricity to move heat rather than create it. This means that they can provide the same amount of heat using less energy, which can result in lower energy bills.
Exterior Insulation Finishing Systems (EIFS) and External Thermal Insulation Composite Systems (ETICS) are cutting-edge construction technologies that have transformed the building industry. These thermal insulation systems provide energy-efficient, cost-effective, and sustainable solutions that cater to various building requirements. JK GreenTech explores the ins and outs of EIFS and ETICS, emphasizing their advantages and applications in contemporary construction projects.
We do a heat loss calculations and can beef up Insulation R values and change to High Performance Windows if needed.
With the advent of green technologies and practices, today the potential to save energy by design can be as high as 40-50 %.
Energy Conservation Building Code (2017) is to provide minimum requirements for the energy efficient design and construction of buildings. ECBC prescribes standards for:
Building Envelope (Walls, Roofs, Windows)
Lighting (Indoor and Outdoor)
Heating Ventilation and Air Conditioning (HVAC) System
Solar Water Heating
Electrical Systems
IEC 60364-8-1 is part of the IEC 60364 series of standards and enhances Parts 1 to 7 with the introduction of requirements and recommendations to design the electrical installation which provides the best compromise between the required level of service and safety, and the lowest electrical consumption.
It is applicable for both greenfield and brownfield projects and should be implemented throughout the life cycle of the facility.
The first edition of Part 8-1 of the IEC 60364 standard was released in October 2014. It has recently been updated, with a second edition released in February 2019.
IEC 60364-8-1 edition 2 gives requirements and recommendations for the design of an electrical installation with an energy efficiency approach. This emphasizes the importance of Energy Efficiency in the design of electrical installations, in the same way as safety and implementation rules.
Our Engineers work with the following Govt Agencies and all our solutions follow their Standards and Guidelines:
1. BUREAU OF ENERGY EFFICENCY, GOI, Ministry of Power https://beeindia.gov.in/en
2. IGBC https://igbc.in/index.php
3. INDIA INSULATION FORUM, https://www.indiainsulationforum.in/
4. PHIUS, https://www.phius.org
5. Jammu & Kashmir Energy Development Agency (JAKEDA) https://jk.ahasolar.in/
12 Pine Enclave, Sanat Nagar, Srinagar, 190005
UT of Jammu & Kashmir, India
